4040 RO Membrane ESPA 1

4040 RO Membrane ESPA 1

  • $295.00


Product Description

ESPA® (Energy Saving Polyamide) elements achieve high flux/lower pressure without compromising standards for high rejection Since its introduction in the late 1990s, the ESPA® membrane has gained wide acceptance in the water treatment industry due to the significant operational cost savings associated with their use.

ESPA1 - The world's leading high productivity, energy-saving polyamide membrane. The growing family of ESPA RO membranes continue to meet the ever-increasing demands of the water treatment industry. Industrial users worldwide have made ESPA their first choice for high productivity and salt rejection.

Product Specifications
  • Permeate Flow: 12,000 gpd (45.4m3/d)
  • Salt Rejection: 99.3% (99.0% minimum)
  • Type Configuration: Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Membrane Active Area: 400ft2 (37.1m2)
The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:
  • 1500 PPM NaCl solution
  • 150 psi (1.05 MPa) Applied Pressure
  • 77ºF (25ºC) Operating Temperature
  • 15% Permeate Recovery
  • 6.5 - 7.0 pH Range
Standard Operating Limits:
  • Maximum Applied Pressure: 600 psig (4.16 MPa)
  • Maximum Chlorine Concentration: < 0.1 PPM
  • Maximum Operating Temperature: 113ºF (45ºC)
  • pH Range, Continuous (Cleaning): 2-10 (1-12)*
  • Maximum Feedwater Turbidity: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Maximum Feed Flow: 75 GPM (17.0 m3/h)
  • Minimum Ratio of Concentrate to Permeate Flow for any Element: 5:1
  • Maximum Pressure Drop for Each Element: 10 psi
The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail on operation limits, cleaning pH, and cleaning temperatures.